HLG01 Page
3
V1.0
© 2007 Stevens AeroModel. All Rights Reserved.
General Information:
Thank you for purchasing this Free Flight kit by Stevens AeroModel. Please inspect your kit for
missing or damaged items. To complete this model you will require basic woodworking tools (a
sanding block and sand paper), thin CA glue, clear tape, a water, lacquer, or oil based wood
sealant.
Product Features:
•
Simple construction with many building aids (jigs included in kit)
•
Viscous Timer for Dethermalizer (DT) Included with model
•
Ultra reliable pop-up fuselage DT design
•
Durable balsa, ply, and hardwood construction with Carbon Fiber boom.
•
Ballast pocket integrated into nose of glider.
•
Outstanding performance ideal for entry-level competition use.
Kit Contents:
•
Illustrated Instruction Manual and Trim Guide
•
Laser cut sheet wood bundle.
o
HLG01-0104 1/8” Med. Balsa
o
HLG01-0204 1/32” Ply
o
HLG01-0304 3/16” Med. Balsa
o
HLG01-0404 1/16” Soft. Balsa
o
13-1/4 in. Length of 1/8 in. diameter carbon tube
•
Hardware
Bag
o
1 - Bag of clay ballast (~7g)
o
1 - Bag of viscous putty for timer (~.07g)
o
1 - 24in. length of abrasion resistant thread
o
5 - #0 x 3/16 in. sheet metal screw
o
3 - T-Pins 1” long
o
1 - 1/14 in. length of 1/16 in. OD aluminum tubing
o
1 - 2 mm ID rubber bushing
o
1 - 1 in. length of .8mm dia. carbon rod
o
1 - 1/8 in. aluminum pop-rivet body
o
1 - 1/8 in. dia. hardwood dowel
o
1 - 1/16 in. laser cut plywood bushing
o
1 - assorted mini rubber bands
o
1 - 1/8 in. laser cut hardwood fuselage pivot