Steris Basil 1100, Operator'S Manual

Page: 35 / 48

6-1
Troubleshooting Operator Manual 122996-004
TROUBLESHOOTING
This section describes the types of Basil ® 1100 Feeder Bottle Filler malfunc-
tions likely to occur and indicates probable causes and corrective actions.
If you are unable to correct the problem with use of the Table 6-1 , Troubleshoot-
ing Chart, or if a problem occurs that is not described on the chart, please call
STERIS. A factory-trained technician will promptly place your equipment in
proper working condition. Service charges may be incurred. Consult your
warranty for details.
NOTE: Never permit unqualified persons to perform service on the bottle filler.
6
WARNING – PERSONAL
INJURY AND/OR EQUIP-
MENT DAMAGE HAZARD:
Only fully qualified service
personnel should as-
semble and/or make adjust-
ments to this equipment.
Assembly or adjustments
done by inexperienced,
unqualified personnel
could cause personal in-
jury or result in costly dam-
age.
W A R N I N G – E L E C T R I C
SHOCK AND/OR BURN
HAZARD: Disconnect all
utilities to equipment be-
fore servicing. Do not ser-
vice the equipment unless
all utilities have been prop-
erly locked out. Always fol-
low electrical safety-related
work practices and stan-
dards.
• Disconnect main power
switch before opening
cover and working on elec-
trical components.
• For continued protection
against fire hazard, replace
only with same type and
rating of fuse.
W A R N I N G – S L I P P I N G
HAZARD: To prevent slips,
keep floors dry. Promptly
clean up any spills or con-
densation.