Steris Basil 1100, Operator'S Manual

Page: 8 / 48

1-2
122996-004 Operator Manual Listing of Safety Precautions and Symbols
WARNING – HEALTH HAZARD:
Vapors from solvent can be harmful. Use with adequate ventilation. Follow directions on the container.
WARNING - SLIPPING HAZARD:
To prevent slips, keep floors dry. Promptly clean up any spills or condensation
CAUTION – POSSIBLE EQUIPMENT DAMAGE:
Use non-abrasive cleaners when cleaning unit. Follow directions on containers and rub in a back-and-forth
motion (in same direction as surface grain). Abrasive cleaners will damage stainless steel. Cleaners rubbed in
a circular motion or applied with a wire brush or steel wool can be harmful to stainless steel. Do not use these
cleaners on painted surfaces.
When removing adhesives from stainless steel, use a solvent specially formulated for that purpose. Rub in a
back-and-forth motion (in same direction as surface grain). Solvent rubbed in a circular motion or applied with
a wire brush or steel wool on assemblies can be harmful to stainless steel. Do not use solvents on painted
surfaces.
When choosing chemicals, to be added to the water, choose ones which have low viscosity and which have no
abrasives or particles that would tend to gum or clog the Acid Proportioner System.