Steris Basil 1100, Operator'S Manual

Page: 15 / 48

2-5
Uncrating/Installation Instructions Operator Manual 122996-004
2.3 Installation
Checklist
After installing the unit, complete the following checklist to assure complete
and correct installation. Contact STERIS to schedule a demonstration of proper
equipment operation.
‰
Shutoff valve (not provided by STERIS), for maintenance purposes, is
installed on the water line and is in compliance with local codes.
‰
Disconnect switch, capable of being locked in OFF position only, is installed
on electrical supply line near the unit and in compliance with local codes.
NOTE: If unit is installed next to other equipment, shutoff valve and disconnect
switch should be located so that service can be shut off to one piece of
equipment at a time.
‰
Feeder Bottle Filler is positioned, as shown on floor plan, with required
clearance space and in relation to building water supply line.
‰
Feeder Bottle Filler is level. If necessary, use adjustable feet and/or add
shims (not included) to level unit.
‰
Building waste line is connected to unit as specified on equipment drawing.
‰
Non-slip floor surface (not provided by STERIS) around unit.