Steris Basil 1100, Operator'S Manual

Page: 19 / 48

3-3
Component Identification Operator Manual 122996-004
NOTE: For further information regarding the acid proportioner, please refer to
manufacturer’s instructions (provided).
Control panel on Acid proportioner units is composed of the following (see
Figure 3-4):
• STOP button - To stop unit operation. When released by twisting, STOP
button will cause the display to show STANDBY and unit will be ready to start
again;
• Alphanumeric Display - To monitor the unit’s operations;
• FUNCTION/SELECT button - To select a function or a function value;
• SET/SAVE button - To set a function value and/or save it;
• FILL/PURGE button - To select fill or purge cycle;
• SILENCE button - To silence the alarm buzzer.
pH Monitor analyzes the pH of all solutions before being dispensed to the
bottles. Monitor includes a display from which the operator can take the pH
readings.
NOTE: The pH Monitor touch pads are for use only by a trained technician, to
perform service procedures such as calibration, etc.
pH Strip Printer provides a printed record of solution pH levels being dis-
pensed to the bottles. The printer uses pressure-sensitive paper (see Sec-
tion 7,
Illustrated Parts Breakdown, for reordering information), which may be
rewound on the roller as it is used, or torn off in sections and maintained.
3.2.2 Acid Proportioner
Units
3.2.3 pH Monitor
3.2.4 pH Strip Printer
Figure 3-4. Acid Proportioner, pH Monitor, and pH Strip Printer
pH Monitor
pH Strip Printer
Acid Proportioner
Alphanumeric Display
SET/SAVE Button
SILENCE Button
FUNCTION/SELECT
Button
STOP Button
FILL/PURGE Button
Label: "PUSH TO STOP.
TWIST TO RELEASE"