THIS PRODUCT IS MANUFACTURED AND CONTROLLED UNDER A QUALITY MANAGEMENT SYSTEM CERTIFIED TO ISO 13485 MEDICAL DEVICE STANDARDS.
FOR RESEARCH USE ONLY. NOT INTENDED FOR HUMAN OR ANIMAL DIAGNOSTIC OR THERAPEUTIC USES.
TOLL FREE PHONE
1 800 667 0322
y
PHONE
+1 604 877 0713
VERSION 2.4.0
y
y
FOR GLOBAL CONTACT DETAILS VISIT WWW.STEMCELL.COM
DOCUMENT #28940
2
1.1.2
Robotic System Overview
RoboSep™ is a pipetting robot comprised of four main mechanical components that are operated under computer control (Figure 2):
x
The Robotic Arm
x
The Carousel
x
The Tip Stripping Arm (not visible in Figure 2)
x
The Hydraulic System
With these systems acting in concert, RoboSep™ performs the following actions to automate EasySep™:
x
Accurately dispenses magnetic labeling reagents into the cell samples using disposable 1 mL tips
x
Mixes and transfers the sample between tubes using a 5 mL tip
x
Transfers buffer from the buffer bottle to tubes on the carousel using a second 5 mL tip
x
Keeps track of the appropriate incubation times
Scheduling software sets the sequence in which RoboSep™ will execute all of the actions
required to process up to 4 samples. This gives RoboSep™ the flexibility to perform different
types of separations at the same time. A custom-designed single-use tip rack contains all the
pipette tips necessary to process a single sample (Figure 3). Each tip has its own compartment
to prevent cross-contamination and the rack is sterilized by gamma-irradiation.
NOTE: Remove the lid of the tip rack prior to use.
Carousel
Robotic
Arm
Lid
Buffer
Bottle
(may
not
be
exactly
as
shown)
Touchscreen
Figure 2 - RoboSep™ Instrument
(a) With lid
(b) Without lid
Figure 3 - RoboSep™ filter tip rack
Summary of Contents for RoboSep 20000
Page 1: ...RoboSep The Fully Automated Cell Separator T E C H N I C A L M A N U A L V E R S I O N 2 4 0 ...
Page 33: ......
Page 34: ......
Page 35: ......