STEIN300_Radius Circuit_06_GB.doc / 01.2020
21
9
Cleaning, inspection, maintenance
9.1
Cleaning
Depending on the ambient conditions of the transport system, the radius circuit gets
dirty. Clean the radius circuit regularly! How frequently this is done depends on the de-
gree of soiling.
STEIN Automation recommends cleaning the radius circuit once a week.
i
Cleaning does not mean the radius circuit needs to be dismantled.
DANGER!
From the Workpiece Transport System starting unexpectedly.
DANGER!
HIGH ELECTRICAL VOLTAGE!
Risk of electric shock!
1 Before carrying out any installation or repair work, disconnect the relevant Work-
piece Transport System from its electrical power supply.
2 Put up warning signs to prevent the system being started up while installation and
repair work is being done.
3 Remove all pallets from the radius circuit!
Protective clothing must be worn!
When cleaning, wear goggles, safety gloves and a dust-mask.
Only use a vacuum cleaner to remove dust, shavings and other particles.
Remove dust, shavings and other particles with a vacuum cleaner.
WARNING!
When cleaning, do not use any abrasive, corrosive or scouring cleaning fluids or cleaning
materials.
Avoid fluid getting into the components of the system!
i
STEIN Automation recommends Industrie Clean manufactured by Würth,
product number: 893140 or Arecal Clean manufactured by RECA Norm,
article no.: 0895014500.
Clean the radius circuit at regular intervals.
Environmental protection!
Dispose of waste material and used cleaning cloths in an environmentally responsible
way.
