STEIN300_Radius Circuit_06_GB.doc / 01.2020
5
he safety signs appear frequently in the text with a picture to explain what the source of
the hazard is.
CRUSHING HAZARD!
This symbol gives warning of a location where there is a risk of being crushed.
HIGH ELECTRICAL VOLTAGE!
This symbol gives warning of possible electric shock.
It appears for all working and operating procedures that must be followed precisely, in
order to avoid injury to personnel or damage to the system through high electrical volt-
age.
Other warning signs:
ATTENTION!
This symbol indicates warnings which, if ignored, will cause a hazard to the machine.
Protective clothing must be worn!
Wear your personal safety clothing:
Safety footwear, hard hat, goggles and safety gloves.
Environmental protection!
This sign indicates warnings that will help to avoid harming the environment.
2
Introduction
The safety of all persons who come into contact with the radius circuit depends funda-
mentally on knowing how the device functions. Therefore:
Read these operating instructions before using the unit for the first time.
These operating instructions contain important information which will ensure the correct,
economical and safe operation of your radius circuit.
i
If not specifically mentioned as deviating, then the same information applies to the radius
circuits that are not described in detail as for the radius circuits described below.
