18
STEIN300_Radius Circuit_06_GB.doc / 01.2020
6
Initial operation
Carry out the following checks before initial operation:
Are all the electrical cables undamaged?
Have all the mechanical components been tightly fastened in place?
Have all tools and other equipment been cleared from the transport area?
Has all the safety equipment been installed?
Once you have carried out all these checks, you can continue with the initial operation.
Switch on the Transport System and its associated processing stations and carry out
a trial run.
Check the functions of the individual elements and processing stations as well as the
pre-programmed overall operation of the entire system.
Check the direction of movement of the radius circuit.
i
It can happen that during idle running (without any WT on the radius circuit) individual
rollers are not driven. This is not a fault but only a situation related to the construction.
WARNING!
Only start the Transport System once you have carried out a successful trial run.
