Appendix 1: ēno Bluetooth pairing options
Steelcase 60
Pairing ēno using the ēno App
With either the new ēno receiver (black USB device) or the previous PolyVision
Bluetooth adapter (gray USB device), the ēno App provides an easy way to pair the
ēno stylus.
To pair your ēno stylus with your host computer using the ēno App:
1
Turn on your computer.
2
Optional: Plug the ēno receiver into any available USB port. A message appears
when device drivers have been installed.
3
Turn on the ēno stylus by removing the cap.
4
On your computer, click the ēno App icon that appears in your system tray
(Windows) or menu extras (Macintosh).
5
Choose “Settings for ēno App” from the menu.
6
Click the “Status” tab.
7
Click “Pair Stylus.” Pairing proceeds automatically for most computers. If you have a
Macintosh with operating system 10.4, follow the prompts you see on your screen.
8
Repeat these steps to pair additional ēno styli with this computer. You can pair three
styli on one host, but a stylus can be paired with only one host at a time.
Pairing ēno using built-in Windows or Apple Bluetooth
If your computer includes the built-in Windows or Apple Bluetooth capability, it is
possible to pair the stylus just as you would any other Bluetooth device, but this is not
recommended for optimum performance.
To pair your ēno stylus with your computer’s built-in Windows or Apple Bluetooth
capability:
1
Turn on your computer.
2
Turn the ēno stylus on by removing the cap.
3
On your computer, navigate to the Control Panel. For example, in Windows click the
Start button, then select “Control Panel.”
4
Click the Bluetooth Devices icon.
5
Select the “Devices” tab and click the Add button. This will launch the “Add
Bluetooth Device Wizard.”
6
Click the box that indicates that “My device is set up and is ready to be found” and
click “Next.”
7
You will see a list of all Bluetooth devices. Click the item listed as “ADP-301”
followed by an associated Bluetooth address.
