Preparing to use ēno
Steelcase 13
ēno stylus
LED status summary
The LED indicator on the ēno stylus provides additional status information about
Bluetooth communication with the computer.
Getting started with a projector
To set up the projector and get started using your computer from the whiteboard:
1
Locate your projector’s video cable and connect it to the video port of your
computer.
2
Connect the other end of the video cable to your projector.
3
Connect the projector’s power cord to an outlet.
4
Turn on the projector and focus your computer screen squarely onto your
whiteboard. The projected image does not need to fill the white area.
5
Calibrate the computer and whiteboard, as described below.
Calibrate the computer with the whiteboard
It may be necessary to calibrate the whiteboard with the computer desktop. This
assures that the location the stylus tip touches the whiteboard exactly corresponds
to the projected computer cursor and pen.
To calibrate the ēno whiteboard with the projected host computer:
1
When the computer desktop is projected onto the whiteboard, make sure it fits
within the whiteboard frame.
2
Use the ēno stylus to tap the Calibrate icon on the ēno App icon strip one time.
LED Condition
Blinks every three seconds
Pairing mode
Two second solid green
Connected and ready to use
Blinks quickly six times
Low battery
