Preparing to use ēno
Steelcase 16
If you use the older PolyVision Bluetooth adapter...
Related topics:
“ēno stylus LED status summary”
If you upgraded to the ēno App version 3.0 or higher, you may be using the original
PolyVision Bluetooth adapter rather than the newer ēno receiver.
Note
You can obtain a new ēno receiver (service part number ENOREC01) by contacting your
local sales representative or Steelcase dealer.
When you use the original PolyVision Bluetooth adapter, the ēno stylus establishes a
Bluetooth connection to the host computer rather than to the Bluetooth adapter. As
a result, when you want to use ēno with a different host computer in the same room,
you need to unpair the ēno stylus from the host computer before you can pair it to a
different host computer.
To unpair the stylus from the host computer:
1
Click the ēno App icon on the host computer.
2
Choose “Settings for ēno App” from the menu.
3
Click the “Status” tab.
4
Turn on the ēno stylus by removing its cap.
5
Select the ēno stylus in the list of Products in the “Status” tab.
6
Click “Remove Stylus.”
Note
For Windows or Macintosh users, if you chose to use the operating system’s Bluetooth
capability to pair the ēno stylus rather than the PolyVision Bluetooth adapter, you can
unpair the stylus as you would remove any Bluetooth device. Refer to “Appendix 1: ēno
Bluetooth pairing options” on page 59 for information about all pairing options.
Be sure that host computer has the ēno App installed.
newer ēno receiver
older PolyVision Bluetooth adapter
