Preparing to use ēno
Steelcase 18
5
Click the ēno interactive whiteboard that you want to configure. The settings for that
product appear in the lower part of the window.
6
Click the drop down menu beside “Board responds to Icon Strip ID” and choose the
option that corresponds to the magnetic icon strip labeled “A,” “B,” or “C” on that
board. Choose “All” when you want all whiteboards to respond to all icon strips or
when only one whiteboard is used.
7
Repeat for up to two additional ēno interactive whiteboards with projectors
connected to the computer.
The calibration between the whiteboard and the projected computer desktop is
important and may require adjustment on each whiteboard separately. To calibrate
multiple whiteboards:
1
Click the ēno App icon in the system tray (Windows) or menu extras (Macintosh).
2
Choose “Align (Calibrate) the Display” from the menu.
3
Choose the display option that corresponds to the magnetic icon strip labeled “A,”
“B,” or “C” on that whiteboard.
4
Follow instructions you see projected from the computer to the whiteboard. Refer to
“Calibrate the computer with the whiteboard” on page 13.
