Preparing to use ēno
Steelcase 14
Note
If you updated to ēno App version 3.0 or higher and you have an older icon strip, tap the
Align icon, shown below.
Note
If this is the first use of the ēno whiteboard, if the computer has just rebooted, or if the
ēno App has just been launched, then tap the whiteboard instead of the Calibrate icon.
The calibration window shown below projects from the computer to the whiteboard.
3
Use the ēno stylus to tap each target projected on the whiteboard, following
instructions you see on the whiteboard.
To cancel the calibration:
o
Press ESC on the computer keyboard.
o
ēno App version 3.2 or higher
: tap the Calibrate or Align icon.
When calibration is complete, you are ready to begin using the stylus to interact with
the computer.
older Align icon
newer Calibrate icon
