Preparing to use ēno
Steelcase 11
Note
For the best signal reception, make sure that no obstacles are present between the stylus
and ēno receiver during normal use. Optionally, connect the USB extender cable
(provided) to the computer and ēno receiver to help you assure optimum exposure of the
ēno receiver.
3
Turn on the ēno stylus by removing the cap.
4
Wait for the stylus LED to blink green once every three seconds. Refer to “ēno stylus
LED status summary” on page 13 for additional stylus LED signals.
5
Press and release the button on the ēno receiver to pair the Bluetooth signal with the
stylus.
While the ēno receiver searches for the ēno stylus Bluetooth signal
, a status
message appears on the computer screen and the LED on the ēno receiver flashes
green.
After pairing is successful
(within 30 seconds), the status message on the
computer screen indicates that ēno is ready to use and the ēno receiver LED
changes to a solid blue color.
If pairing is not successful,
a status message appears on the computer screen.
Troubleshooting
: If pairing was not successful, you can try to resolve the problem
by removing the ēno receiver from the USB port, waiting five seconds, and
reinserting it before attempting the pairing process again.
