STARPLUS Starplus DHS-L, Technical Manual

Page: 81 / 294

Programming 3-11
Chapt er 3 - Key Station Features, Opera tion, and Programming
17.
D_TONE TIME 200-800 200 This timer is used if the Dial Tone Detect
option is set to YES.
18.
DIAL WAIT TIME 0-8 0 This timer is used when the Dial Tone Detect
is set for NO.
19.
B_TONE TIME 100-800 500 The Busy Tone Interval i s used to match the
exp ected busy tone from the CO/PBX. This
option is used with the AUTO BUSY REDIAL
feature.
20.
DIAL DELAY 100/500….2000 500 When making an outgoing CO call thi s is the
time of delay the transmission path must be
delayed before a connec ti on. This is used
with the toll restriction feature and must
match the time the CO requires before
providing dial tone. This is set in
mill iseconds.
21.
CO PRECFW TME 10-60 30 This timer controls when a CO line wil l be
preset forwarded when programmed under
CO Parameters: Answer Position: CO Preset
Forward.
22.
CAMP ON TIME 0-60 20 This sets the interval between camp on
tones.
23.
ALARM PLAY 10/30/60-600 30 This op tion sets the remi nder beep when the
ex tensi on reminder is reached.
24.
HOTEL ENABLE Y/N N This feature is used to set Hotel/Motel
features on system.
25.
SYS ABBR CHECK Y/N N When set to Yes the stations COS determines
what speed dial locations may b e dial ed.
26.
TSI CONNECT Y/N N This option enab les/disables the outgoing
CO call transmission path before toll
restriction is satisfied.
27.
CONF TONE Y/N N This enables/disables conference tone.
28.
CALL DURATION 1-60 10 This option is used for outgoing call to
simulate answer super vision for SMDR.
29.
VM MON TIME 10-60 10 This timer controls the maximum interval
allowed for a station user to ac tivate the
Answering Machi ne Emulation feature.
30.
METER SYSTEM Y/N N This is not ap plicable to the DHS-L .
31.
ICLID NAME Y/N Y Determines if the calling name will be
disp layed (if provided) on display phones
and ICLID ID enabled.
32.
TENANT CALLI NG Y/N Y Determines which tenant groups can cal l
each other.
Table 3-3: Call Handling Programming Table
C A L L H A N D L I N G Range Def ault Description