STARPLUS Starplus DHS-L, Technical Manual, Page: 167 / 294

Hold 3-97
Chapt er 3 - Key Station Features, Opera tion, and Programming
Programming
The Remind Time can be programmed to alert stations of calls that have been placed on
System Hold at their station. The station that placed a call on System Hold will hear a
reminder tone over the key telephone speaker once each time the Remind Time expires
until the CO Line is answered, or the call is disconnected.
Default
The DHS-L Remind Time is set for 30 sec, and is variable from 0/10/30/60/90 sec.
Conditions
†
Hold Reminder applies to both intercom and CO line calls.
†
Hold Reminder applies to CO line calls that are on System Hold, Exclusive Hold or
Screened Transfer Hold.
System
Description
You may place any CO line on System Hold by one button operation of [HOLD]. When
you place a line on System Hold, the green lamp for that line will flash at the I-Hold rate.
This System Hold line will flash the red lamp at all other stations.
Operation
While on a line, the green lamp for that line is I-Use flashing (double wink rate):
Press [HOLD]. The green lamp now flashes at a slow rate and the call is placed on
System Hold.
Conditions
†
Pressing [HOLD] will place a conference on Exclusive Hold if you are the controlling
party and you temporarily exit to add another party.
†
When an intercom call (conference) is placed on Hold, the steady lamp indication of
the other station(s) will not change.
†
I-Hold Indication allows you to distinguish between a call you placed on hold at your
telephone and calls placed on hold at other telephones. When you place a call on
System Hold, the associated line lamp will flash at the System Hold rate but will light
green. The same held CO line at other stations will flash at the System Hold rate but
will light red.
Any party whois placedon Hold will hear music,only if available through the external
music source connection.