STARPLUS Starplus DHS-L, Technical Manual, Page: 78 / 294

3-8 Programmi ng
Chapter 3 - Key Station Features, Operation, and Programming
16.
ECF OPERATION Y/ N N All ows station to set Ex ternal Call Forward.
17.
SMDR OUTPUT Y/ N Y All ows the station to generate a cal l record
for each cal l.
18.
PORT TYPE STA/VM/VA STA Por t type can be either an extension voice
mail or voice announce.
19.
DIR. NO. SWAPPING -- -- Each station por t has an assigned extension.
The extensi on number may be exchanged
(swapped) with any other station port.
Swap With Enter number station is to b e changed to.
20.
LINE ASSIGNMENT Each station can have access to specific line/s on the system or all lines for
outgoing calls.
Show Module 1 1 Always 1
Show Slot 3-12 -- Enter the sl ot the desired CO card is in.
Port 1 - Port 8 TNT1-TNT6
Y/ N
TNT1
Y
Por t indicates access for port of line card. TNT
indicates tenant group that CO line is
assigned to.
21.
RECEIVE ASSIGNMENT Each station can be set to receive incoming call indi cations for every li ne on the
system or a specific line(s).
Show Module 1 1 Always 1
Show Slot 3-12 - Enter the sl ot the desired CO card is in.
Port 1 - Port 8 TNT1-TNT6
Y/ N
TNT1
Y
Por t indicates access for port of line card. TNT
indicates tenant group that CO line is
assigned to.
22.
DSS UNIT 1 Any valid sta Null Up to 4 DSS units may be assigned to a
sp ecific station.
23.
DSS UNIT 2 Any valid sta Null Up to 4 DSS units may be assigned to a
sp ecific station.
24.
DSS UNIT 3 Any valid sta Null Up to 4 DSS units may be assigned to a
sp ecific station.
25.
DSS UNIT 4 Any valid sta Null Up to 4 DSS units may be assigned to a
sp ecific station.
Table 3-1: Station Programming Table
S T A T I O N Range Default Desc ription