STARPLUS Starplus DHS-L Technical Manual Download Page 227

Page: 227 / 294

Cal l Operator (C al l Attendant)

4-7

Chapter 4 - SLT Features and Operation

DND Forward

1. Lift handset.

2. Dial [#] + [2] + [7] + [xxx].

xxx = destination de sired

External Forward

1. Lift handset.

2. Dial [#] + [2] + [6].

Follow To

1. Lift handset.

2. Dial [#] + [2] + [5] + [xxx].

xxx = destination de sired

Follow Me Call Forward

1. Lift handset.

2. Dial [#] + [2] + [3] + [xxx] + [pppp].

xxx = destination de sired

pppp = current password

No Answer

1. Lift handset.

2. Dial [#] + [2] + [4] + [xxx] + [t].

xxx = destination de sired

t = time to ring before forwarding; 0 = 10 secs, 1= 20 secs, 2 = 30 secs, 3 =40 secs, and 4 =50 secs

Call Operator (Call Attendant)

Description

The system Attendant station may be easily called by one dialed digit code. At default,
this code is 0.

Operation

1. Lift handset.

2. Dial [0].

Conditions

The code dialed for the system attendant (0- 9) is dependent on Database
Programming of Operator Code. If 9 is programmed, that is the code that must be
used to call the system attendant.

The Operator access code (0 or 9) is mutually exclusive with the outside CO line
access code.

Summary of Contents for Starplus DHS-L







































































































































































































































































































Search results

Summary of Contents for Starplus DHS-L

Reviews:

STARPLUS Starplus DHS-L, Technical Manual, Page: 227 / 294

Search results

Summary of Contents for Starplus DHS-L

Reviews: