STARPLUS Starplus DHS-L Technical Manual Download Page 234

Page: 234 / 294

4-14

Po rt Numberi ng

Chapter 4 - SLT Features and Operation

External (Paging Speakers)

1. Lift the handset.

2. Dial [820 or 821].

Meet Me Answer (Meet Me Page)

Any user hearing an Internal or External Page can answer the Page by dialing the Meet
Me Page feature code.

When a page announcement is heard:

1. Lift the handset.

2. Dial [#] + [5] + [9].

Station Group

1. Dial [4].

2. Dial Group Number (01-24).)

System All Call

1. Lift the handset.

2. Dial [425].

Tenant Paging (All Groups)

1. Lift the handset.

2. Dial [400].

Port Numbering

Description

Adding SLT stations to the

DHS-L

has the significant advantage of port-gain. When the

SLT interfaces are installed (2-Port Analog Adapter and 2-Port SLT Expansion), the station
numbering and available station ports are expanded at a ratio of 2-to-1.

Summary of Contents for Starplus DHS-L







































































































































































































































































































Search results

Summary of Contents for Starplus DHS-L

Reviews:

STARPLUS Starplus DHS-L, Technical Manual, Page: 234 / 294

Search results

Summary of Contents for Starplus DHS-L

Reviews: