STARPLUS Starplus DHS-L, Technical Manual, Page: 80 / 294

3-10 Programmi ng
Chapter 3 - Key Station Features, Operation, and Programming
Table 3-3: Call Handling Programming Table
C A L L H A N D L I N G Range Def ault Description
1.
LINES CONFERENCED Y/N N Determines if line i s all owed to be included
in a conference call.
2.
CO FLASH 0.1-1.5 1.0 Sets the flash time on CO type trunks.
3.
PBX FLASH 0.1-1.5 0.2 Sets the flash time on PBX type trunks.
4.
PAUSE TIME 1-8 2 Sets the pause time used for speed dial ing,
and VM prefixes.
5.
DIALING RATI O
Break Time 60/67 67 Timer is used for pulse dialing.
Inter_dgt 400-800 800 Timer is used for both pulse and DTMF
dialing This is in mi lliseconds.
Tone Time 90/120/150 90 Sets the length of the DTMF tone in
mill iseconds.
6.
PR TIME 20/40….300 100 The Polari ty Reversal timer can be
programmed i n 20 second i ncrements, and
control s the Call Ab andon in CO
programming.
7.
RING ABANDON 1-10 6 Must be set 1 second longer than the longest
sil ent peri od of the incoming ring cycle.
8.
HOLD REMINDER 0/10/30/60/90 60 Timer is used for the system hold reminder.
9.
EX_HOLD TI ME 0-8 0 Exclusive Hold Timer is set i n 1 mi nute
increments.
10.
WARNING TIME 01-30 5 Used for the drop time i n station setti ngs and
is programmable i n minutes.
11.
XFR_I RECALL 16/30/60/90/120 30 The NO ANSWER recall timer is used for CO
transfer recall.
12.
XFR_B RECALL 16/30/60/90/120 60 The BUSY recall timer is used for CO transfer
recall.
13.
SLT RECALL 30/60/90 30 This timer is used only for SLT phones.
14.
SLT HOOK_FLASH
Star t 60/100-1400 200 Timer must be set 100 ms less than the SLT
flash time.
End 100-1500 800 Timer must be set 100 ms more than the SLT
flash time.
15.
PBX AUTO PAUSE 0-9 1 Timer is used only for li nes that are
programmed as PBX.
16.
D_TONE DETECT Y/N N This is used for detecting dial tone on a CO
line before diali ng.