STARPLUS Starplus DHS-L, Technical Manual

Page: 79 / 294

Programming 3-9
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-2: CO Lines Programming Table
C O L I N E Range Default Description
1.
POSITION Non-
Programmable
None Represents the system posi tion for that
station number (1-XX-YY):
†
1 = modul e (1 only)
†
XX = card slot 4-12
†
YY= p or t on card 01-08, 1-24 (T1).
2.
TENANT GROUP 1-6 1 There are 6 tenant groups in the system.
Each stati on may be assigned to one tenant
group.
3.
ROUTE 1-24 1 Used to group trunks together. Each trunk
may be assigned to one trunk g roup.
4.
DAY COS 0-7 0 Determi nes the line d ialing privileges in the
day mode of operation.
5.
NIGHT COS 0-7 0 Determi nes the line d ialing privileges in the
night mode of operation.
6.
DIALING Tone/Pulse Tone Determi nes which line wil l use DTMF or Dial
Pulsing when dialing out.
7.
LINE TYPE CO/PBX/Page/
Emp ty
CO To program what type of trunk is connected
to that circuit.
8.
CALL ABANDON Y/N N To program the trunk to drop the call after a
loss in loop current.
9.
PRIVATE TO Any valid station Null Sp ecifies a station that a specific trunk will be
private to.
10.
VM DIGITS Any val id mai lbox Null
11.
ANSWER POSITION Station 201 is the only ringi ng station by default.
6 p ositions may be programmed for each ringing option, and 1 position for
Night mode.
Day 1
(Member 1-6) Any valid station
or hunt group
201 Si x members are avai lable for ringing
assi gnment.
Day 2
(Member 1-6) Any valid station
or hunt group
201 Si x members are avai lable for ringing
assi gnment.
Day 3
(Member 1-6) Any valid station
or hunt group
201 Si x members are avai lable for ringing
assi gnment.
Night Any valid station
or hunt group
201 Only one member is available for ringing
assi gnment.
12.
CO Pre Dest Any valid station
or hunt group
Null