Page 38
GPS Chart 150
4.3.1.4 Editing Mark
Place cursor on Mark
Press 'ENTER'. Select "
EDIT
" and press 'ENTER'. A window appears to modify name,
symbol and coordinates of the existing Mark (see previous Figure 4.3.1.3)
Use the
ShuttlePoint knob to select the field. If you have selected name field, press
'ENTER': use the
ShuttlePoint knob to insert the character (10 characters max), then
press 'ENTER'. If symbol field is selected press 'ENTER': a window with 16 different
symbols appears. Use the
ShuttlePoint knob to select the symbol and press
'ENTER'. If coordinates field is selected, press 'ENTER' and then use the
Shuttle-
Point knob to insert the value. Then press 'ENTER'.
4.3.1.5 Finding information on Marks: User Points List page
Place cursor on Mark
Press 'ENTER'. Select "
DIRECTORY
" and press 'ENTER'. A full window is opened
showing information about all stored User Points (Marks and Waypoints). Move up/
down the
ShuttlePoint knob to select the User Point you wish. If the page contains
more than 7 User Points, the list continues in the next pages. See Section 4.4.1.9 for
additional information.
4.4
ABOUT CREATING AND USING ROUTES
At anytime, you may add or delete Waypoints, see a Route summary, reverse the
direction of the Route or erase the entire Route.
4.4.1 Waypoints
You may add Waypoints, delete Waypoints from a Route, move any Waypoint in the
Route to another location, insert a Waypoint between two existing ones, find any
Waypoint at anytime. Every time you place the cursor on a Waypoint the following
functions (see from 4.4.1.3 to 4.4.1.9 Section) are available.
4.4.1.1 Adding Waypoint
'ROUTE'
When 'ROUTE' is pressed a Waypoint appears on cursor position. When the cursor
is placed on a Waypoint a window is shown containing information on Waypoint:
Figure 4.4.1.1 - Waypoint placing
