Standard Horizon CP150 Owner'S Manual Download | Manualshive

Page: 43 / 81

background image

GPS Chart 150

Page 45

Figure 4.4.1.9b - User Point icon

Otherwise choose "

ALL

" and press 'ENTER' to show all icons (see Figure 4.4.1.9).

Finding User Point

'MENU' + "USER POINTS" + 'ENTER' + "FIND" + 'ENTER'

Allows finding the point on the list by entering the User Point name. If "

ICON

" is set to

"

ALL

" the search is performed in the whole list, otherwise is performed among the

User Points with the selected icon.

Locating User Point

'MENU' + "USER POINTS" + 'ENTER' + "LOCATE" + 'ENTER'

Allows locating the selected point on the map display.

Editing User Point

'MENU' + "USER POINTS" + 'ENTER' + "EDIT" + 'ENTER'

Allows editing name, symbol and position of the selected User Point. The coordinates
of any User Point belonging to the active Route cannot be changed.

Deleting selected User Point

'MENU' + "USER POINTS" + 'ENTER' + "DELETE" + 'ENTER'

Deletes the selected User Point. A warning message appears, select "

YES

" and press

'ENTER' ('CLEAR' otherwise). If the selected point is the Target (Destination), the
chartplotter shows a warning message saying that the function cannot be executed.
The Target must be deactivated before deleting the selected point. Also if the selected
point belongs to the active Route (the Route with the Target) it cannot be deleted.

Deleting All User Points

'MENU' + "USER POINTS" + 'ENTER' + "DELETE ALL" + 'ENTER'

Deletes all User Point in the list. A warning message appears, select "

YES

" and press

'ENTER' ('CLEAR' otherwise). If one of the points is the Target (Destination), the
chartplotter shows a warning message saying that the function cannot be executed.
The Target must be deactivated before deleting the selected point. Note that deleting
User Points also Routes are deleted.

Sending User Points

'MENU' + "USER POINTS" + 'ENTER' + "SEND" + 'ENTER'

Allows sending all User Points in the list to an external device (depending on selected
port).

Receiving User Points

'MENU' + "USER POINTS" + 'ENTER' + "RECEIVE" + 'ENTER'

Allows reading User Points from the NMEA input port (NMEA sentence WPL).

«
...
41
42
43
44
45
...
»

Summary of Contents for CP150


















































































Reviews:

No comments

Related manuals for CP150

Brand: Wavetrend Pages: 2

Brand: LAPLACE INSTRUMENTS Pages: 21

Brand: M2 Antenna Systems Pages: 8

ID ISC.ANTS370/270

Brand: Feig Electronic Pages: 23

Brand: MikroTik Pages: 4

Brand: Velleman Pages: 12

Brand: Schwarzbeck Pages: 6

Brand: Alcad Pages: 6

Brand: KING Pages: 36

Brand: Sea Tel Pages: 101

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 7

Brand: Sirius Satellite Radio Pages: 21

Brand: Sirio Antenne Pages: 2

Brand: Garmin Pages: 48

StreetPilot 2820

Brand: Garmin Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands