Standard Horizon CP150 Owner'S Manual Download | Manualshive

Page: 63 / 81

background image

GPS Chart 150

Page 65

Depth Area Limit

Sets a reference depth value (in the range [0 - 30000]): the software fills all the bathymetric areas that
have starting depth area lower than the reference value with grey. All other bathymetric areas are white.
So, if the reference depth is 0, all areas are white, if it is 99.999 all areas are gray. The default setting
is 10 Mt.

'MENU' + "MAP SETUP" + 'ENTER' + "MARINE SETTINGS" + 'ENTER' + "DEPTH AREA LIMITS" + 'ENTER'

To select the unit (Meters (Mt), Feet (Ft) or Fathom (FM)) see Depth (Unit).

Depth Contours

Imaginary lines connecting points of equal water depth (see also Bathymetric Lines).

(NMEA) Depth Trend page

'MENU' + "NMEA DISPLAY" + 'ENTER' + "DEPTH TREND" + 'ENTER'

Shows the graph of the Depth received from the NMEA Port. Pressing 'ZOOM IN'/'ZOOM OUT'
changes the time scale.

Figure 8b - Depth Graph page

Destination

It is the point where the vessel heads. It is also called Target.

DGPS = Differential GPS

Provides even greater positioning accuracy than standard GPS (see Part B of "

Handbook").

Diff(erential) Corr(ection) Source

Allows the selection of the Differential Correction signal source among None, WAAS and External
RTCM. If the "NMEA2/RTCM INPUT" is set to NMEA the option External RTCM cannot be selected.
The chartplotter shows a Warning message. The default setting is WAAS.

'MENU' + "ADVANCED SETUP" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "INTERNAL GPS SETUP" +
'ENTER' + "DIFF CORR SOURCE" + 'ENTER'

(NMEA) Display

'MENU' + "NMEA DISPLAY" + 'ENTER' + "DISPLAY" + 'ENTER'

It is possible to choose the page layout (the number of fields in the page) and the type of data shown
in each of the fields in the page. If the selected type of data is not received the field shows dashes.

Figure 8c - NMEA DISPLAY Page

Data selectable are: SOG, COG, DST, BRG, XTE, TTG, ALTITUDE, HDOP, VDOP, BOAT SPEED,

«
...
61
62
63
64
65
...
»

Summary of Contents for CP150


















































































Reviews:

No comments

Related manuals for CP150

Brand: Galleon Pages: 12

OBID ID ISC.ANT340/240-A

Brand: Feig Electronic Pages: 28

Brand: Alcad Pages: 7

LOOP ANTENNA MIDI

Brand: Ciro Mazzoni Pages: 41

Brand: Velleman Pages: 12

Brand: Panorama Antennas Pages: 2

REMO BAS X3174 MIDI

Brand: BAS Pages: 2

Brand: Philips Pages: 1

Brand: RCA Pages: 4

Brand: RCA Pages: 12

Brand: RCA Pages: 14

Brand: Butternut Pages: 16

Brand: BAS Pages: 3

Brand: SteppIR Pages: 22

Brand: Winegard Pages: 2

Brand: SLX Pages: 2

Brand: PRO.SIS.TEL. Pages: 5

Brand: PRO.SIS.TEL. Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands