manualshive.com logo in svg

Standard Horizon CP150, Owner'S Manual

Share
Download
Standard Horizon CP150 Owner'S Manual Download Page 9

  

GPS Chart 150

Page 11

2. ACCESSORIES

2.1

PACKING LIST

When the package containing the chartplotter is first opened, please check it for the
following contents:
• External bracket (includes the knob) - TT150001CP
• Protective cover - RR150002CP
• Power data cable - TT90000001
• Flush mounting Screws - UU90000001
• Flush mounting Template -  RR15000001
• Antenna - QQ150001CP
• Owner's Manual - EECP150001
• Quick Reference guide - EECP150002CP
• 

 Handbook - EE150002EP

2.2

OPTIONS

• Overhead Mounting Bracket - RR150003CP

Figure 2.2 - Bracket

If any parts are missing contact the Dealer this chartplotter was purchased from.

Accessories and Replacement parts may be ordered from STANDARD HORIZON's
parts Department at 562-404-2700 Ext 351 or via the web at www.standardhorizon.com.

 are available through your local marine Dealer. For additional

information on C-MAP Cartography contact 800-424-2627 or visit web site at
www.c-map.com.

Summary of Contents for CP150


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands