Standard Horizon CP150 Owner'S Manual Download | Manualshive

Page: 11 / 81

background image

GPS Chart 150

Page 13

-

The

and

keys

There are two different modes to change chart scale "By Zoom" and "By Scale".

'MENU' + "GENERAL SETUP" + 'ENTER' + "ZOOM TYPE" + 'ENTER' + "By Zoom"
+ 'ENTER'

Pressing the 'ZOOM IN' shows more detail of a smaller area, by changing the chart
scale and zooming in on your display. Press 'ZOOM OUT' to change the scale and
show a wider, otherwise less detailed view. Pressing and holding 'ZOOM IN'/'ZOOM
OUT' allows the quick zoom, that is the fast change of the chart scale where only the land
areas are drawn. When 'ZOOM IN'/'ZOOM OUT' is released all map details are shown.

'MENU' + "GENERAL SETUP" + 'ENTER' + "ZOOM TYPE" + 'ENTER' + "By Scale"
+ 'ENTER'

When 'ZOOM IN' or 'ZOOM OUT' is pressed the chartplotter will show the zoom
window: pressing the 'ZOOM IN'/'ZOOM OUT' or moving the

ShuttlePoint knob up/

down moves the scale and bar graph, press 'ENTER' to zoom to the scale. Press
'CLEAR' to quit the zoom window and keep the selected chart scale.

NOTE

Due to the cartography contained in the

there will be multiple

charts shown within the same scale range.

The

ShuttlePoint knob

The

ShuttlePoint knob moves the cursor about on the display screen, quickly and

accurately. It also scrolls the desired option in the menu page(s). If in Home (Navigate)
mode, it allows to exit from Home mode to cursor mode.

The

key

Press 'ENTER' to select the desired option or to confirm selection.

The

key

From the chart display press 'CLEAR' to set Home mode. Also press 'CLEAR' to exit
from menu or data windows or to leave a menu without making changes, to abort
selected function or to step backward from a selection made in the menu.

The

key

Selects the Main Menu. When in menu mode, moving the

ShuttlePoint knob to the right

enters a selection, moving the knob to the left clears the function.
If pressing 'MENU' for 3 seconds from map display activates Edit mode to choose data
to be shown in General, 1 Line Small, 1 Line Large or 2 Lines Small windows.
If pressing 'MENU' for 3 seconds from Data pages (Navigation, Highway, GPS Status,
NMEA Display) allows to customize all data fields shown in the selected page.

«
...
9
10
11
12
13
...
»

Summary of Contents for CP150


















































































Reviews:

No comments

Related manuals for CP150

Super Beam CSB790A

Brand: Comet Pages: 2

AIRNET 11Mb CPE BRIDGE

Brand: Netkrom Pages: 34

GREAT PYRENEES Series

Brand: Parsec Technologies Pages: 9

PowerBeam M5 PBE-M5-620

Brand: Ubiquiti Pages: 28

Brand: Jatontec Pages: 36

Brand: Silvercrest Pages: 34

M6060060P1D43602V

Brand: Ventev Pages: 2

Brand: Schlage Pages: 16

Brand: Winegard Pages: 8

Brand: Winegard Pages: 2

Brand: Winegard Pages: 8

Brand: ALLIANCE Pages: 4

Brand: Blonder tongue Pages: 4

Brand: Premier Pages: 3

Brand: Orbit Pages: 16

Brand: Xtreme Signal Pages: 2

Brand: Radio Shack Pages: 7

EXTERNAL IRIDIUM ANTENNA

Brand: Garmin Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands