Page 14
GPS Chart 150
The
key
Pressing the GOTO key allows the user to select a destination point at the cursor or
a saved route or mark.
The
key
Places Mark under the cursor position (in Home mode Mark is placed under the ship's
position).
The
key
Places Waypoints to make Routes.
The
key and Lamp/Contrast
Press 'PWR' to turn the chartplotter On. Press and hold 'PWR' down (once the
chartplotter has been turned On) for 3 seconds turns the chartplotter Off.
Press and immediately release 'PWR' to adjust light and contrast of the display.
The
key
Sets MOB (Man OverBoard).
C-CARD slot
(see Section 4.1.7).
GPS Antenna connector
Power and I/O connector
(see Section 4.1.2).
3.2
SCREEN DISPLAY CONFIGURATIONS
The chartplotter display can be shown in different pages among (see following
Sections):
Figure 3.2 - Screen display pages
