![background image](http://html.mh-extra.com/html/slx/p20/p20_user-manual_1294079001.webp)
Fabric Indoor Antenna P20
27805R
User Guide
Support: www.slxtechnology.com/support
Introduction
Congratulations on the purchase of your new
SLX P20 Fabric Indoor Antenna.
The P20 antenna is designed to receive
VHF and UHF terrestrial TV signals indoors
without requiring a power source. It is ideal for
receiving all available VHF and UHF channels
in strong signal areas (typically within 0-10
miles of a transmitter).
• Optimized for digital reception - Supports
Freeview on HD and 4K screens
• Unique attractive fabric finish
• 1.5m High quality coaxial cable - fully
screened to minimise interference
• Designed to provide maximum
performance in urban areas
• Compatible with signal boosters when
signal is weak
General Safety Precautions
• To clean first disconnect from your TV and
use a lightly dampened soft cloth. Do not
use chemical solvents or strong detergents
• Do not attempt to open the unit, there are
no user serviceable parts
• Do not expose to direct sunlight, very high or
low temperatures, moisture, liquids, strong
magnetic fields high frequencies and dusty
environments
• If anything goes wrong, contact our
technical support team
Installation
Before installation make sure your TV is
switched off. Select a location on a flat
surface preferably high up and in line of sight
of a window. Plug the coax plug on the end
of the antenna cable into the “Antenna In”
socket on your TV. Make sure you run the
cable so that it will not be in a position where
people could trip over it.
Switch on your TV and search for channels.
Rotate and adjust the position of the aerial
to find the best alignment and location for
optimum reception.
ANT IN
or PVR
Rotate to find best
alignment
Flat
mounted
Wall mounted
mount on a wall
facing a window or
nearest transmitter
Stand
mounted
TV
Rotate to find best
alignment