background image

WARNING: INSTALLATION OF 

THIS PRODUCT NEAR POWERLINES

IS DANGEROUS. FOR YOUR SAFETY, 

FOLLOW THE INSTALLATION 

DIRECTIONS.

Before Installation  Note:  

to CATV SYSTEM INSTALLER—Article 820-40 of the NEC specified that the cable ground shall be connected to the grounding system of 

the building “as close to the point of cable entry as practical”.

Note:

  Do not plug your Mini-State power supply into an AC outlet or DC power source until all electrical and antenna connections have been made. Doing so may short 

out the power supply/transformer and void your warranty.

CAUTION

WARNING:

To reduce the risk of fire or electric shock, do not expose this 

appliance to rain or moisture.

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:

Use of controls or adjustments or performance of procedures other 

than those specified may result in hazardous radiation exposure.

CAUTION:

  TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICING. REFER ALL SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral 

triangle is intended to alert the user to the presence of uninsulated 

“dangerous voltage” within the product’s enclosure that may be of sig

-

nificant magnitude to constitute a risk of electric shock to persons.  

The exclamation point within an equilateral triangle is intended to alert 

the user to the presence of important operating and maintenance (ser

-

vicing) instructions in the literature accompanying the appliance.

Your Antennacraft 

HDView360

®

  Mini-State

®

  antenna  is 

perfect for receiving off-air reception. You can  store chan

-

nel positions with the radio frequency remote control, then 

later recall one of the channel memories. Your antenna will 

automatically go to the direction you programmed for your 

best reception.
The directional, rotating antenna provides excellent reception 

of HDTV/VHF/UHF TV channels in most viewing locations. 

The UV protective housing is made of impact-resistant filled 

co-polymer, making the exterior resistant to weathering. It 

features both AC and DC operation and is excellent for use 

on recreational vehicles, boats, or in the home. 

MINI-STATE

®

 Antenna System

© 2008 ANTENNACRAFT

Covered under one or more of the following U.S. Patents:
227,785; 3,721,990; 3,761,333; 3,909,691

► RV
► BOAT
► HOME

with RF Remote and

Programmable, Direction Memory

Model 

HDMS9100RV i

ncludes two 

RV/Boat mounting brackets.

Model HDMS9100

Optional 

UAM9000

Offset J-Mount 

The VHF section is a circular shaped, slot tuned, broadband, 

unidirectional traveling wave antenna. The UHF section is a 

broadband, multi-element array. Both UHF and VHF signals 

are amplified with a built-in split-band amplifier that provides 

up to 20 dB gain.

The 

HDView360

®

 Mini-State

®

 Antenna System is designed 

for long life and requires no routine maintenance. Should 

the unit ever quit working, refer to the troubleshooting tips to 

help determine possible causes. Do not attempt to service 

this product yourself, as opening or removing covers may 

expose you to dangerous voltage or other hazards. Refer 

all servicing to qualified service personnel.

IMPORTANT—

This model is not compatible with Mini-State 5MS series motor drives.

®

Summary of Contents for Mini-State HDMS9100













Reviews: