In pause mode, you are able to reset or adjust the timer if desired. Please
see details on the Count-up and Count-down timer features below.
To resume your mixing task, simply press the Pause/start button again. The
mixer will resume mixing at the same speed setting, and the timer will re-
sume counting up/down depending on your selection made.
Count-up timer
The count up timer informs you how long your ingredients have been mixing
for. The next time you mix the same ingredients you can then set the count-
down timer for the specific time.
As soon as you start mixing, the timer will automatically start to count up.
The maximum mixing time is 20 minutes and will be displayed on the LCD
screen as “20:00” (twenty minutes, zero seconds).
The mixer will automatically stop mixing after 20 minutes and beep twice.
The screen will flash for about 5 seconds.
The timer will automatically re-set to “00:00”.
The LCD screen will display the speed setting that it stopped at and this
setting will continue to flash.
If you pause the mixer at any time during the mixing process by pressing the
Pause/start button at the front of the speed control dial, the mixing time
displayed on the LCD screen will flash until you resume mixing by pressing
the Pause/start button again.
To reset the timer to “00:00”, turn the speed control dial anti-clockwise to
the “0” location or, when paused, press.
Count-down timer
The count-down timer is especially useful when following a recipe that
specifies mixing times.
The ‘+’ and ‘-’ buttons allow you to choose the desired mixing duration. Press
the ‘+’ button and you will add 30 seconds.
Press the ‘-’ button and you will reduce the previously set mixing time by
30 seconds.
For example, if a recipe calls to “beat for 2 minutes”, you can set the count-
down timer to 2 minutes. Simply press the ‘+’ button until “02:00” is dis-
played on the LCD screen, i.e. press the ‘+’ button four times.
If you would like to change the countdown time after your initial setup, press
the Pause/start button, then press the ‘+’ and ‘-’ buttons to increase or re-
duce the mixing time to the nearest 30 sec increment.
For example, you set the count-down timer to 3 minutes and turn the speed
control dial to start mixing on a chosen speed. After 1 minute, 25 seconds,
you pause the mixer by pressing the Pause/start button. The LCD displays
the remaining count-down time of 01:35. If you now press the ‘+’ button
once to increase the mixing time, the display will show 02:00 (which is the
nearest 30 sec increment).
To reset the timer to “00:00”, turn the speed control dial anti-clockwise to
the “0” location or, when paused, press the ‘+’ and ‘-’ buttons simultane-
ously.
When the chosen mixing time is completed, the mixer will beep twice to
inform you that the time has expired. It will stop mixing automatically. The
timer display “00:00” and the LCD screen will flash for about 5 seconds. The
NOTE
Be sure the attachment is locked firmly in place.
4. Place the bowl on the base with the handle facing you. Then gently ro-
tate the bowl in a clockwise direction until it locks into position (Fig 3).
The bowl should feel firm with no movement.
5. Lower the mixer head with the selected mixing attachment in place into
the mixing bowl. Press the ‘head release’ button to un-lock it from its
position and ease the mixer head down (Fig. 4).
6. The splashguard can now be placed over the bowl if desired (Fig 5).
USE
1. Position the mixer on a level, dry surface such as a bench top. Ensure the
mixing bowl is in place and the desired attachment is inserted.
2. Plug the power cord into a 230/240 Volt AC power outlet.
3. A beep will sound and the LCD screen will light up to inform you that the
mixer is now switched on. The LCD screen will flash three times and the
timer will display “00:00”. The screen will also display the speed setting.
If the LCD displays a speed setting other than “0” and continues to flash,
you may turn the speed control dial anti-clockwise to the “0” position to
re-set the speed setting.
4. a. If using the splashguard, add ingredients to the mixing bowl through
the pouring shoot.
b. If using the mixer without the splashguard, release the mixer head
out of its locked position and ease it backwards until it locks into its tilt
position. Add ingredients to the mixing bowl. Then, un-lock the mixer
head and lower it forward into the mixing bowl.
5. Turn the speed control dial clockwise to commence mixing (Fig. 6), or, if
a speed is already set, press the Pause/start button. The LCD screen will
display the chosen speed setting. Instructions for mixing speeds for each
type of mixture are shown in the ‘Mixing Guide’ on page 12.
6. When mixing is complete, turn the speed control dial anti-clockwise to
the ‘0’ position (Fig. 7) and unplug the cord from the power outlet.
7. Remove the splashguard if positioned on the bowl.
8. Press the ‘head release’ button and ease the mixer head back until it is
locked into the tilt back position (see Figure 1 on page 6).
9. To remove the particular mixing attachment, push it upwards, turn it an-
ticlockwise, then pull it downwards (Fig 8).
Pause mode
At any stage during your mixing task you can pause the mixer. This enables
you to assess the mixing progress, scrape any food mixture down the sides
of the mixing bowl with a spatula, or add additional ingredients - without
affecting the timer.
Pause the mixer during operation by pressing the at the front of the Pause/
start button speed control dial.
The time on the LCD screen will flash continuously, displaying the mixing
time at which the mixer has been paused.
