ST HDS2 Series, User Manual, Page: 9 / 67

ST7MDTU3-EMU2B Emulator User Manual 2 - Getting Started
9/63
2 GETTING STARTED
2.1 Your System Requirements
The ST7MDTU3-EMU2B Emulator (both hardware and software components) has
been designed to work with PCs meeting the following requirements:
• One of the following operating systems: Microsoft
®
Windows
®
95, 98 or NT
®
.
• Intel
®
Pentium (or compatible) processor with minimum speed of 100 MHz.
• Minimum RAM of 32 MB.
• 21 MB of free hard disk space to install all of the ST7 tools.
2.2 Delivery Checklist
The emulator kit (ref.: ST7MDTU3-EMU2B), is delivered with the following (refer to
Figure 2 ):
1 One emulator box containing the ST7 HDS2 main board (ref.: MB176) and two
50-wire flat cables to connect the ST7 HDS2 main board to the generic
emulation probe.
2 One emulator power supply.
3 One parallel cable.
4 Three EMC suppress ferrites.
5 One logic probe cable.
6 Two SMB to BNC cables.
7 One generic emulation probe—the ST7 Generic Probe (ref.: DB467).
8 An ST72F63-Target Emulation Board (TEB) (ref.: DB465).
9 An SO34 socket adapter (ref.: DB354 & DB355).
10 One User Manual for the ST7 Family Software Development Tools (assembler,
linker, and formatter). (Not shown.)
11 This manual. (Not shown.)
2