ST HDS2 Series, User Manual

Page: 30 / 67

3 - STVD7 ST7MDTU3-EMU2B Emulator User Manual
30/63
The range of debugging features available will be more limited because the source
files will not be accessible.
1 Launch STVD7 and select File>Open Workspace from the main menu.
2 Browse to the folder where your binary file is stored, and select ST7
Application files (*.abs, *.s19, *.hex, *.elf) in the Files of type field.
3 Select your binary file (
*.abs
,
*.s19
,
*.hex
or
*.elf
) and click Open.
3.9 Opening lone programmable files (*.s19 or *.hex)
If you do not have access to the
*.map
and
*.lst
files generated by the ST7
toolchain, you may also load isolated *
.s19
and *
.hex
files from within STVD7.
The range of debugging features available when you open these files will be very
restricted. You will only have access to the Disassembly Window and the
Memory window.
1 Launch STVD7 and select
Debug>Start Debugging from the main menu or
click on .
2 Open the Memory window by selecting View>Start Debugging from the main
menu
.
3 With the cursor in the Memory window, right-click the mouse to open the
Memory contextual menu.
Figure 16: Open Workspace window