3 - STVD7
ST7MDTU3-EMU2B Emulator User Manual
26/63
5
Finally, you must define a make file or a batch file. There are several sample
files provided with STVD7 (see
Table 1
). Here we have chosen
build.mak
as
the default make file, used when the
Build command is issued, and
rebuild.mak
as the make file to use when the
Rebuild command is issued.
6
After you have finished defining your project settings, click
Finish.
Once the workspace is opened, the Workspace window displays its contents.
When you create a new workspace, the first time you switch to Debug context (see
Section 3.12
for an explanation of STVD7 contexts), the MCU Configuration
window will automatically open to prompt you to choose you target MCU and
confirm or modify its option and memory configuration (see
Section 3.13
).
3.7
Opening an existing workspace
If you have already created a workspace, you simply need to open it in order to
load all of your project settings into the STVD7.
Note:
There are a number of sample workspaces provided with STVD7 that you can open to get
familiar with STVD7. These samples are listed in
Table 1
.
1
From the main menu, select
File>Open Workspace.
This command opens a window where you can browse to any folder you wish,
and select an existing workspace.
Figure 12: Open Workspace window
Summary of Contents for HDS2 Series
Page 42: ...3 STVD7 ST7MDTU3 EMU2B Emulator User Manual 42 63...
Page 52: ...4 Emulator Features ST7MDTU3 EMU2B Emulator User Manual 52 63...
Page 56: ...Appendix A Troubleshooting ST7MDTU3 EMU2B Emulator User Manual 56 63...
Page 62: ...Product Support ST7MDTU3 EMU2B Emulator User Manual 62 63...
