ST HDS2 Series, User Manual

Page: 6 / 67

1 - Introduction ST7MDTU3-EMU2B Emulator User Manual
6/63
1.1 Emulator Configuration
Figure 1 shows the configuration for the ST7MDTU3-EMU2B emulator kit. The
main ST7 HDS2 box is connected to your PC via the parallel port. Two flat
cables connect the ST7 HDS2 box to the ST7MDTU3-Active Probe. The ST7
Generic Probe is connected to the ST72F63-TEB, to which a device adapter
can optionally be fixed so that you can connect the emulator to your application
board.
Figure 1: ST7MDTU3-EMU2B General Configuration
1.2 Emulator Operation
A symbolic debugger, ST7 Visual Debug, (also referred to as STVD7), is
provided to control the emulator.
ST7 Visual Debug can be run on a PC under the Windows environment, and is
common to all ST7 devices. ST7 Visual Debug uses a window menu-driven
interface, and enables you to configure the emulator.
application board
application board power supply
emulator power
supply
parallel cable
ST7-Generic
Probe
connection to PC’s
parallel port
ST72F63-TEB
device
adapter