User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
26
response command, and so on. Note: Information of these bytes is based on the Universal Hart Command
Specifications.
In the above example, “Byte5-8” represents the Primary Variable and can be seen in a small description in the
bottom left area.
Bytes:
Response bytes of “Response Data”
Memory Address: A
ssigned memory address which this byte is located in the memory buffer area of the
GT200-HT-EI
EtherNet/IP register address: T
he relevant EtherNet/IP register address of the “Memory Address”.
Note: This address is not a single address.
Choose “Byte0-3” and “Byte4”, then click auto mapping, as shown below:
Close the dialog box, download the configuration into the GT200-HT-EI.
5.2.3 Conflict Detection
Conflict detection is used to check the distribution condition of the input and output data of all commands stored
in the memory.
Click the
icon and this will show the conflict detection interface as follow:
