User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
27
The left side of the tree view is the configuration commands. The right side of the tree view is the data memory
address including the receive data storage address and the send data storage. The top side is the memory
distribution of the HART’s sending data. The bottom side is the memory distribution of the HART’s receiving
data. When one memory unit is configured with two commands or more, the memory unit will display a red color.
When the distributed memory exceeds the defined scale of gateway, the exceeding part will display a yellow color.
The white color area represents usable memory. The Green color area indicates occupied memory. Clicking on a
command, the distribution chart shown in blue, will show the storage location of input/output data.
5.2.4 Auto Mapping
AutoMap will automatically distribute the memory with no conflict according to the input/output bytes number set
by the users’ commands.
You should set the correct input/output bytes for each commands, then click the
icon and select
“yes” in the popup menu.
