User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
29
5.2.6 Download Configuration
Click the icon
. it will download the configuration into the gateway.
5.2.7 Memory Data Display
Show the data exchange inside of the gateway, users can use this function to debug the HART fieldbus in the
absence of the EtherNet/IP side. Steps are as follows:
1) Ensure that the GT200-HT-EI’s function bit of configuration switch is in the ON state and the mode bit of
configuration switch is in the OFF state, restart the gateway. Then the GT200-HT-EI is in the debug mode.
2) Use a network line to connect the GT200-HT-EI’s RJ-45 port and a computer.
3) Open the software “SST-HI-CFG”, Click “Tool—Show Memory Data” or click on the icon
,
choose the correct gateway in the device scanning window, interface is as follows:
