User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
24
Initialization output: Execute the command only once when power is on.
Disable output: The command will not be sent.
Memory starting address of sending data:
Set the memory starting address of output data by this command, the
range is 3000~3999
The register starting address of sending data: T
he property is automatically calculated by the gateway, used for
register addressing.
Sending data length (byte): U
sed to set the length of output data by this command.
Sending data length (word): T
he property is automatically calculated by the gateway, used for user checking
output data length, 1 word=2 byte
Memory starting address of receiving data: S
et the memory address of input data by this command. The
response data only includes data area of the HART frame.
The register starting address of receiving data: T
he property is automatically calculated by the gateway, used
for register addressing
Receiving data length (byte):
Set the length of input data by this command.
Receiving data length (word):
The property is automatically calculated by the gateway, used for user checking
output data length conveniently, 1 word=2 byte.
Command index: T
he property is automatically calculated by the configuration software, it indicates the index in
the configured command list this command belongs to.
5.2.2.5 Delete Commands
Select the command that needs to be deleted, Right click the mouse and click “Delete Command”. The menu
command in the toolbar can also accomplish the same action.
5.2.2.6 Delete Nodes
Select the node needed to be deleted, Right click the mouse and click “Delete Node”. The menu command in the
toolbar can also accomplish the same action.
