User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
42
confirmation, this cannot be changed. If you want to change data types, you can create a new module.
IP Address:
Set the IP address of the EtherNet/IP adapter module (IP address of GT200-HT-EI, configured by the
software SST-HI-CFG)
Connection Parameters:
Set Connection parameters during communication. Please refer to chapter 7
Note: "Size" (configured bytes) in the above picture should be consistent with the relevant input and output
bytes of Instance in the above chapter.
Click "OK", set the scanner polling time interval in the pop-up dialog box, the default is 10ms, as shown below:
After setting this interval, click "OK" to save. Double click "Controller Tags", unfold "SSTGateway: O", as shown
below: