Display PC Software Installation
¤
2005-2010 SR Research Ltd.
75
translate the included make files to rebuild the experiments. This release of the Windows
Display Software does not supply examples for C++ programming.
9.2
Mac OSX Installation
To use Mac OSX as a Display computer with the EyeLink 1000 system, various EyeLink
software components should be installed on the computer. The installation process consists of
the following basic steps:
x
Install the “Mac OSX Display Software”. The installer disk image is located in the
“Display PC Installation/Mac OSX” folder of the “EyeLink 1000 Software” CD – the
latest version of the software can be downloaded from SR Research Support website
(https://www.sr-support.com/forums/showthread.php?t=15).
Mount and open the disk image under MacOS, then click on the installer and follow
the instructions, using the default settings as prompted. The EyeLink libraries,
documentation and source code examples are installed in the Applications:EyeLink
folder.
x
Install the EyeLink Data Viewer. The installer disk image is located in the “Display
PC Installation/Mac OSX” folder of the “EyeLink 1000 Software” CD – the latest
version of the software can be downloaded from SR Research Support website
(https://www.sr-support.com/forums/showthread.php?t=10).
Mount and open the disk image under MacOS, then click on the installer and follow
the instructions, using the default settings as prompted. Data Viewer is installed in
the Applications:EyeLink DataViewer directory.
x
Install the USB HASP Key driver for EyeLink Data Viewer. Mount the
“Hdd_MacOSX.dmg” disk image to get access to the HASP driver installer. Double
click on the installer made available by the disk image and follow the instructions,
using the default settings as prompted.
x
Configure the network connection to the EyeLink 1000 Host PC. Set the IP address
to 100.1.1.2 and subnet mask to 255.255.255.0. You can do this by opening the
System Preferences (Apple menu item, then select ‘System Preferences…’) and click
on the Network Icon. Next go to your computer’s Built-In Ethernet device, select
Manually on the Configure pop-up menu, and enter the above IP address and
subnet mask. Click Apply to apply these new settings.
If you plan to program your experiments in MatLab, install the latest version of the
PsychToolBox and reboot the computer. Some demo examples can be found in the
Psychtoolbox directory which is in the Applications folder at:
"Applications/Psychtoolbox/PsychHardware/EyelinkToolbox/EyelinkDemos/GazeContingentD
emos".
