Spirit JOHNNY G SPIRIT BIKE, Owner'S Manual

Page: 37 / 72

37
www.johnnygspiritbike.com
PAIR HEART RATE DEVICE
HR Zone program
requires connection of a Heart Rate Strap prior to using
program. Connecting console to a Heart Rate Strap is accomplished by entering
Programs Mode during the Warm Up Mode.
If user puts on a HR strap after leaving the Warm Up Mode and has not paired
HR, console reset will be needed.
• While in the Warm Up Mode, press and hold Play Key for 3 seconds.
•
PAIR HR DEVICE displays on console. Press
Play Key
to scan for HR devices. The
console may display SCAN HR DEVICES up to 12 times.
• If sensors are detected, the number of sensors displays.
• If needed, reset console by simultaneously holding + Key and Play Key for 3 seconds.
NOTE: Along with each device displayed is number indicating the distance each
device is from the console. The number is in decibels meters and may display as
65DBM. Usually the smaller number is your chest strap but not always. If another
rider is wearing a chest strap in front of you, their device may be closer to your
console than you are. Ideally rider should be familiar with their MyZone SN#
located on the back of the MyZone module or their devices ANT+ number.
This will simplify selecting the appropriate HR strap.
.