67
www.johnnygspiritbike.com
Weekly maintenance should focus on the overall performance of your Johnny G Spirit Bike. During these inspections, look
for vibration and possible loose assemblies. Have an experienced rider ride each bike to identify and help diagnose any
vibration, noises, and any "unusual" feeling from the drive belt. Either faulty flywheel alignment or a loose belt can cause
vibration. Check for proper flywheel alignment. If flywheel requires adjustment refer maintenance to a properly trained
service tech. Inspect each bike for loose assemblies, parts, bolts and nuts. Give attention to the following:
•
Tighten all frame base hardware.
•
Tighten all pop-pin handles.
•
Tighten seat hardware.
•
Tighten pedal toe clip/toe straps.
The monthly maintenance check should be a comprehensive inspection of the overall frame and main assembly
components of the Johnny G Spirit Bike in addition to the Weekly Maintenance.
Inspect major moving parts that require constant proper torque. Loose or misadjusted parts can result in personal injury or
damage to the bike. Check the following parts for security and/or proper torque.
Pedals
: Verify that the pedals are re-torqued after the first 10 hours of use and every 100 hours of operation, thereafter.
Use a torque wrench if components are loose. IMPORTANT: It is not recommended that members change out the
pedals on the bike.
NOTE: The pedal to the crank arm bolt torque is: 30 - 35 lbf•ft.
It is recommended that the frame on the bike is sealed from sweat impurities that may speed the corrosion process at
least once a month.
Summary of Contents for JOHNNY G SPIRIT BIKE
