56
Johnny G by Spirit
LIMIT SENSOR
Limit Sensor tests for the proper movement of the flag the moves between the home sensor
(S1) and the limit sensor (S2). This test is performed only when motor error has occurred.
•
S1 OFF, S2 OFF, bottom number is encoder wheel count (0)
•
Using the
+
and
– Keys
, adjust the motor to try and change S1 to ON.
•
Pedaling resistance should change as keys are pressed.
•
If S1 ON, stop pedaling immediately, allow console to turn off and let stand for 15 minutes
minimum for memory to clear before trying bike.
•
E
XIT
will revert to setting screen.
•
Press
+ Key
for next screen or reset console to exit Maintenance Mode.
RPM SENSOR TEST
RPM Sensor
controls a sensitive setting for your bike's functionality. Proper training is
required for this setting. The purpose of this setting is to test the functionality of the RPM
detection system.
•
Press
Play Key
to enter RPM Sensor Test.
•
REED ON RPM displays
ON
or
OFF
.
•
When REED switch is closed, displays
ON
.
•
When REED switch is open, displays
OFF
.
•
RPM displays
PEDAL RPM
.
•
Press
Play Key
to exit to setting screen.
•
Press
+ Key
for next screen or reset console to exit Maintenance Mode.
Summary of Contents for JOHNNY G SPIRIT BIKE
