Spirit JOHNNY G SPIRIT BIKE, Owner'S Manual

Page: 55 / 72

55
www.johnnygspiritbike.com
BRAKE TEST
Brake test
controls are a sensitive setting for your bike's functionality. Proper training is
required for this setting. The purpose of this setting is to test the magnetic resistance system.
• Press
Play Key
to enter Brake Test. MOTOR TEST AUTO is displayed.
•
Press + Key or – Key to switch to Motor Manual and Limit Sensor and Exit.
• Press
Play Key
.
• L EVEL TO 20 displays, Press
Play Key
.
•
Auto- run motor in a look from L-1 to L-20 and back to L-1.
• Press Play Key
to end, revert to BRAKE TEST.
MOTOR TEST MANUAL
•
Use
+ Key
and
– Key
to move motor.
• Press
Play Key
to end, revert to BRAKE TEST .
•
ENCODER displays. This is Encoder count or digital value. Upper right of display
displays LIMIT SENSOR CONDITION .
•
1 = HOME
•
2 = ACTIVE RANGE
•
3 = END
• Lower display displays
ENCODER SET VALUE .