58
Johnny G by Spirit
LED BRIGHTNESS
The purpose of this setting is to change the brightness of the display.
•
Press
Play Key
to change setting.
•
Default brightness setting is 2.
•
Press
+ Key
or
– Key
switch between LED Brightness 1, 2, or 3.
•
Press
Play Key
to accept and exit to setting screen.
•
Press
+ Key
for next screen or reset console to exit Maintenance Mode.
BIKE ID SETUP
The purpose of this setting is allowing numbering of the bike when using a Leaderboard
software, such as Performance IQ or similar.
•
Press
Play Key
to change setting.
•
Console will display
BIKE ID SETUP,
and
1
on the lower console flashing.
•
Press
+ Key
or
– Key
to adjust the bike number to the desired number. Over 1,000 are available.
Set each bike to a unique number. The number must be set to 1 or above, 0 is not a valid number.
•
Press
Play Key
to accept, bike number will stop flashing momentarily then turn off indicating set.
•
Press
+ Key
for next screen or reset console to exit Maintenance Mode.
Summary of Contents for JOHNNY G SPIRIT BIKE
