Safety
SPECTRO GENESIS FES 27 — 17.07.2019
— 11
Notice!
Warns of activities or conditions that may adversely affect the safety or function of
the instrument.
Information
Displays information that is important for the correct and safe use of the instrument
2.2
User information
Compliance with all safety instructions is mandatory. It's for your own safety.
The instrument - in its transport packaging - may only be transported by
expert organizations or by specifically trained personnel.
Unpacking, installation, setup and connection of the instrument may only be
performed by service personnel that is authorised by the manufacturer.
Carry out only operator maintenance work that is described in chapter 6 of the
operating instructions. Any further services (e.g. technical maintenance) or
repairs must only be performed by service personnel that are authorized by
the manufacturer.
During the operation and while performing maintenance tasks compliance
with safety instructions and accident prevention regulations is mandatory.
This is specified in DIN EN 61010 or a comparable national standard.
The safety measures must be checked following every technical maintenance
or repair activity. This check is to be performed in accordance with VBG4/DIN
EN 61010 or a comparable national standard.
Compliance with the maintenance schedule specified by the manufacturer
and recording all maintenance activities is mandatory. This will maintain the
operational safety of the instrument.
Never tamper with the safety devices! If it is suspected that a safety device
does not work properly, shut down the instrument immediately! Please
contact your Service Center.
Please observe the information labels provided on the instrument.
Only genuine spare parts must be used when repairing the instrument. The
use of non-genuine spare parts will make the CE Declaration of Conformity
null and void. Excepted are spare parts from manufacturers approved by
SPECTRO.
Summary of Contents for FES 27
Page 2: ......
