Operation
— 30
SPECTRO GENESIS FES 27 — 17.07.2019
5.5.2
Start the measurement
To perform a measurement, proceed as follows:
1.
Select “Measurement” on the navigation tool bar. Select a "Workbook" and
load it by clicking the "Load" button.
If there is no work folder in the directory, a suitable workbook and a
method must be created first. To do this, use the online help.
2.
Feed the sample to be measured to the sample introduction system by means
of the peristaltic pump.
3.
Press the “Measure” button in order to start the measurement.
The measurement is carried out automatically.
When the measurement is complete, the results are displayed on the
screen.
Press the “Finish” button to terminate the measurement process.
The measurement process is finished.
Perform further measurements as needed.
Summary of Contents for FES 27
Page 2: ......
