Spectrex SharpEye 40/40I, User Manual

Page: 20 / 85

SharpEye
TM
IR3 Flame Detector User Guide
20 Principles of Operation
1.4.5.2 FM, CSA
The 40/40I Flame Detector is certified for FM and CSA Explosion Proof and
Functionality per FM3260:
 Class I, Division 1, Groups B, C, and D.
 Dust Ignition Proof – Class II/III Division 1, Groups E, F, and G.
 Ingress Protection – IP67, IP66, NEMA 250 Type 6P.
 Fuel Test Response including: Gasoline, N-Heptane, Diesel, JP5,
Kerosene, Ethyl, Alcohol 95%, IPA, Methanol, Methane, LPG,
Polypropylene, and Paper.
 For more details see FM Report Project ID3029553, and CSA Report No.
2451134.
1.4.5.3 SIL-2
The 40/40I Flame Detector is certified for the SIL-2 requirement per IEC
61508.4, Chapter 3.5.12.
The alert condition according to SIL-2 can be implemented by:
 Alert signal via 0 – 20mA current loop.
or
 Alert signal via alarm relay and fault relay.
 For more details and guidelines for configuring, installing, operating, and
service, see
SIL-2 Features on page 83 and TÜV Report No. 968/EZ
348.04/16.
1.4.5.4 EN54-10
The 40/40I Flame Detector is certified to EN54-10 and CPD.
 The detector has been tested and approved per EN54-10 by VdS.
 This test includes a functional test, environmental test, EMI/EMC test,
and software check.
 For more details see VdS Report No. BMA 12118.
1.4.5.5 Inmetro (UL)
The 40/40I Flame Detector is in compliance with the standards ABNT NBR
IEC 60079-0, ABNT NBR IEC 60079-1, ABNT NBR IEC 60079-7, ABNT NBR
IEC 60079-18, ABNT NBR IEC 60079-31, and INMETRO decree No. 179 as of
May 18th, 2010. Further details may be found on Certificate of Compliance
No. UL-BR 16.065XX.
www.acornfiresecurity.com
www.acornfiresecurity.com