Spectra Watermakers Newport 1000, Installation & Owner'S Manual

Page: 33 / 70

33
Normal Start Up Using the Auto Run Button
•
Press Auto Run button
once and the system will prime and run for 1 hour. The
display reads “AUTO RUN MODE” then “STARTING” with a 30 second priming
countdown timer. After the prime, the display reads “AUTO RUN MODE” with a
countdown timer. An hour of run time is added, up to 12 hours, with each successive
momentary press of the Auto Run button. An hour can be added at any time. The dis-
play shows the default readout unless there is an alarm condition. Successive presses
of the Alarm/Display button will scroll through the displays starting with “GPH
PRODUCT.” Upon auto shut down by the timer or by the optional tank full float
switches, the system will automatically fresh water flush and re-flush every 5 days.
•
Pressing the Stop button stops the sequence at any time with no flushes.
Normal Operation
•
For best efficiency, Auto Run the system as long as possible each time: The more
product water you make each time, the lower the proportion of product consumed
by the flush cycle.
Never let the system sit with salt water in it. Never allow
continuous air leaks in the intake, as air is damaging to the pumps.
Normal Shut Down
•
If the system was started using the Auto Run button, the system will shut off on its
own when the selected run time is over and will auto flush every 5 days.
•
Pressing the Stop button at any time will shut off the system, but it will not flush it-
self, and the % Day Auto Flush will not be activated.
•
The optional tank float switches will shut off the system from any mode. If the sys-
tem was started by the Auto Run button the system will flush and then re-flush every
5 days. If the system was started by the Start/Stop button it will do a 1 time flush. The
display will read “TANK/S FULL.” Once one of the tank float switches opens, the
alarm and “TANK/S FULL” display will cease on its own. Note that if “TANK/S
FULL” is displayed, the system cannot be restarted.